packing

Packaging of metal pulleys

In the production program, the cut-off list, cable type and pulley suitable for the cable concerned should be
notified to the quality control unit. The user must reconfigure the cable around the pulley as directed, or in other
words, have to monitor the cable carefully during operation. So he should note the cable features on temporary
special cards.

Output pulleys should be prepared for Routine, Sample or Type tests. The administrator first approves the temporary
card information and then issues a new card as an identification tag for all the reels separately. (For electrical
cables TS-QC-QP-04-CD-01 with ISIRI 607 standard and for other cables TS-QC-QP-04-CD-02)

Users install a new label on the cable and seal the company identification mark at the two ends of the cable with a
hinged punch. (The company’s ICMC brand acts as a mark on the cable.) They are then mounted on two ends of the cable
and fastened to the pulley. All products must be packed in sheets and plastic straps. Finally, the Supervisor issues
the final control for the product delivery to the TS-QC-QP-04-fm-06 or TS-QC-QP-04-fm-05/3 document warehouse.
According to customer requests for pulleys, the pulleys should be transferred to the carpentry department.

Special packaging

If specific packaging is required on the client’s request, this request is notified to the Industrial Engineering
Unit by the sales unit. After analyzing the customer’s request for manufacturing and packaging instructions, the
Industrial Engineering Department communicates to the Quality Control Unit. In other words, if any other part is
required to comply with that instruction, the quality control unit is responsible for monitoring the packaging
process.

Important Tips in Shipping Pulleys:

  • The pulleys do not fall.
  • Use forklifts or cranes for transportation.
  • To raise the pulleys, place the forklift horn in the pulley hole.
  • The pulleys should be positioned on the ground.
  • Do not place the pulleys on the floor.

Every 50 cm of cable length must be marked as follows:

  • Product standards and testing procedures
  • Size of cable and its type
  • U0 / U (Um) kV voltage level
  • Manufacturer name
  • Year of product production

Most emphasis is on the “pod type” (if a special pod is used).

for example:

IEC60502-1 CU/XLPE/SWA/PVC3*240/120Oil Resistance0.6/1.0(1.2) kVIRAN CABLE MFG. Co2014